In METACOL within our main products we have the commercialization of GATES in HD; These are hydraulic or mechanical elements, whose function is the regulation of the transit of water or any other fluid in pipes, canals, dams, locks, bypass works, among other hydraulic structures. Guillotine Gate with HD Shutter AWWA C-513 / C-561 /C-563 Key points for the selection of our gates 
SELECTION The correct selection of a certain type of side gate depends on many factors: the maximum fluid pressure head, the type of fluid, the number of seals required, the type of seal required, the depth of the installation, the drive system, the operating position, available space, width, stem length (distance from the center of the gate to the upper point from actuator to maneuvering column). ACCESSORIES NECESSARY FOR STEM INSTALLATION: Made of stainless steel. They allow the operation of the gate acting as a screw. MANEUVERING COLUMN: It ensures stem guidance and gate operation from the maneuvering surface. GUIDE SUPPORT: In installation depths greater than 2 meters it is convenient to use guide supports that control and guide the movement of the stem. MAXIMUM OPERATING PRESSURE: The maximum operating pressure is 5 m.c.a. For higher working pressures, the METACOL technical department should be consulted beforehand. 
SEAL TESTS: According to AWWA C-513 / C-561 / C-563 standard. PAINT COATING: According to AWWA C-550. OPERATION: An opening and closing cycle. INSTALLATION You must take into account the following technical information: Assembly plan or installation according to the type of gate. Overall Plan of the Gate.
@metacol Compuerta tipo Guillotina interconexión PETAP #metacol #metacolcolombia #represas #compuertas #guillotina #metalurgia #presasdeaguia #presasdeagua #compuertatipoguillotina
